Shure KSM141/SL STEREO Cardioid/Omni Condenser Mic Stereo PAIR
£1,053.80£878.17 Incl. VATExcl. VAT
The Shure® KSM141 is a premium, end-address, condenser microphone with a unique rotating collar that allows for easy switching between a highly consistent cardioid or true omnidirectional polar pattern. Its class A, discrete, transformerless preamplifier captures an extremely transparent sound, and a three-position attenuation switch and low-cut filter allow for handling of extremely high sound pressure levels (SPL) and controlled bass response. An ultra-thin, 24-karat gold-layered diaphragm and superior build quality make the KSM141 ideal for studio use, yet rugged enough for the most demanding live applications.Stereo microphone techniques give depth and spatial placement to sound sources for broadcasting, recording, or sound reinforcement applications. The Shure A27M allows you to mount two microphones on a single stand with a wide range of angles and vertical separations for a variety of coincident and closely-spaced stereo configurations.
- A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns, providing flexibility in a wide variety of recording and performance applications
- Ultra-thin, 2.5 μm 24-karat gold-layered, low-mass Mylar® diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and inter-modulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low-frequency rumble (less than 17 Hz) caused by mechanical vibration
- Three-position attenuation switch (0 dB, 15 dB, and 25 dB) for handling extremely high SPLs
- Three-position low-frequency filter switch reduces stand vibration noise and counteracts proximity effect
- Cartridge Type: Electret Condenser
- Polar Pattern: Cardioid, Omnidirectional (selectable)
- Frequency Response: 20 to 20,000 Hz
- Output Impedance: 150 Ω
- Sensitivity open circuit voltage, @ 1 kHz, typical: –37 dBV/Pa[1] (14.1 mV)
- Maximum SPL: 1 kHz at 1% THD
- PAD ON
- 5000 Ω load: 170 dB
- 2500 Ω load: 164 dB
- 1000 Ω load: 159 dB
- PAD OFF:
- 5000 Ω load: 145 dB
- 2500 Ω load: 139 dB
- 1000 Ω load: 134 dB
- PAD ON
- Signal-to-Noise Ratio: 80 dB
- Dynamic Range @ 1 kHz:
- 5000 Ω load: 131 dB
- 2500 Ω load: 125 dB
- 1000 Ω load: 120 dB
- Clipping Level 20 Hz to 20 kHz, 1% THD:
- 5000 Ω load: 15 dBV
- 2500 Ω load: 9 dBV
- 1000 Ω load: 3 dBV
- Self Noise equivalent SPL, A-weighted, typical: 14 dB SPL-A
- Common Mode Rejection 10 to 100,000 kHz: ‚â•50 dB
- Attenuator Switch: 0 , -15 , -25 dB
- Low-Frequency Filter Switch: Flat, –6 dB/octave below 115 Hz, or –18 dB/octave below 80 Hz
- Connector: Three-pin professional audio (XLR), male, balanced
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Related products
