Shure KSM32/SL Cardioid Condenser Microphone with Shock Mount Champagne
£702.14£585.12 Incl. VATExcl. VAT
Shure KSM313/NE Bidirectional Dual-Voice Ribbon Microphone
£1,437.48£1,197.90 Incl. VATExcl. VAT
Shure KSM32/CG Cardioid Condenser Microphone Black
£609.23£507.69 Incl. VATExcl. VAT
Description
The Shure® KSM32 is a premium, side-address, condenser microphone with a cardioid polar pattern engineered for highly critical studio recording and live sound productions. With an extremely flat, extended frequency response, the KSM32 provides transparent reproduction of the original sound source. A 15 dB attenuation switch allows the KSM32 to handle the high sound pressure levels (SPL) associated with drums, percussion, and ensembles, while the 3 position low cut filter helps counteract stage vibrations or proximity effect.
Features
- Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range
- Embossed, high-compliance diaphragm provides extended low frequency response
- Ultra-thin, 2.5 μm, gold-layered, low mass, Mylar® diaphragm for excellent transient response
- 15 dB attenuation switch for handling extremely high sound pressure levels (SPL)
- Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect
- Integrated three-stage pop protection grille reduces “pop” and other breath noise
- Internal shock mount reduces transmission of handling noise
Specs
- Cartridge Type: Electret Condenser
- Polar Pattern: Cardioid
- Frequency Response: 20 to 20,000 Hz
- Output Impedance: 150 Ω
- Sensitivity open circuit voltage, @ 1 kHz, typical: –36 dBV/Pa[1] (16.0 mV)
- Maximum SPL: 1 kHz at 1% THD
- PAD ON
- 2500 Ω load: 154 dB
- 1000 Ω load: 148 dB
- PAD OFF
- 2500 Ω load: 139 dB
- 1000 Ω load: 133 dB
- Signal-to-Noise Ratio: 81 dB
- Dynamic Range @ 1 kHz:
- 2500 Ω load: 126 dB
- 1000 Ω load: 119 dB
- Clipping Level 20 Hz to 20 kHz, 1% THD:
- 2500 Ω load: 9.0 dBV
- 1000 Ω load: 3.0 dBV
- Self Noise equivalent SPL, A-weighted, typical: 13.0 dB SPL-A
- Common Mode Rejection 20 to 20,000 kHz: ‚â•50 dB
- Attenuator Switch: 0, -15 dB
- Low-Frequency Filter Switch: Flat, –6 dB/octave below 115 Hz, or –18 dB/octave below 80 Hz
- Connector: Three-pin professional audio (XLR), male, balanced
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Power Requirements: 11–52 V DC phantom power (IEC-61938), 4.7 mA
- Net Weight: 490 g (17 oz.)
Shipping & Delivery
Related products
£830.61£692.18 Incl. VATExcl. VAT
£339.33£282.78 Incl. VATExcl. VAT
£153.45£127.87 Incl. VATExcl. VAT
£218.79£182.33 Incl. VATExcl. VAT
£791.01£659.18 Incl. VATExcl. VAT