Name: Shure KSM42/SG Cardioid Condenser Large Dual-Diaphragm Microphone
Brand: Shure
SKU: KSM42/SG
Availability: InStock

Shure KSM42/SG Cardioid Condenser Large Dual-Diaphragm Microphone

£826.81£689.01 Incl. VATExcl. VAT

SKU: KSM42/SG Category: Condenser

Description

This premium side-address, cardioid condenser microphone features a large dual-diaphragm optimized for world-class vocal recording and performance applications. With a tailored frequency response and extensive internal and external pop filtering, the single-pattern, dual-diaphragm design of the KSM42 exhibits an exceptionally smooth frequency response and ultra-wide dynamic range. The KSM42 is the premier choice for capturing sophisticated and intimate vocal performances.

Features

Highly consistent cardioid polar pattern creates a broad ‚Äúsweet spot‚Äù and natural off-axis response
Dual-diaphragm design with an active front, ultra thin (2.5 micron) 24-karat gold, low mass, 1-inch Mylar¬Æ diaphragm
Passive back diaphragm delivers exceptional control of low frequency proximity effect
Tailored low-frequency roll-off minimizes low frequency room noise
Integrated three-stage mesh grille guards against wind and breath noise
Open cage ShureLock¬Æ rubber suspension shock mount with low-profile Popper Stopper‚Ñ¢ magnetic pop filter produces a natural space between performer and microphone
Prethos‚Ñ¢ Advanced Preamplifier Technology exhibits extremely low self-noise with superior dynamic range, transient response and ultra-low distortion for transparent recording
Premium electronic components and gold-plated internal and external connectors
Durable zinc die-cast housing and hardened low carbon steel grille
Internal shock mount to reduce unwanted handling and stand noise

Specs

Transducer Type: Dual-Diaphragm, Front-Active, Externally Biased Condenser
Frequency Response: 60 to 20,000 Hz
Polar Pattern: Cardioid
Output Impedance: 147 ohms
Sensitivity (at 1 kHz, open circuit voltage) ‚àí37 dBV/Pa (14.1 mV): 1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD):
- 1000 ohms load: 139 dB
- 2500 ohms load: 139 dB
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 86 dB S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
Dynamic Range (at 1 kHz):
- 1000 ohms load: 131 dB
- 2500 ohms load: 131 dB
Common Mode Rejection (10 Hz to 100 kHz): > 60 dB
Clipping Level (20Hz-20 kHz at 1% THD):
- 1000 ohms load: 6.5 dBV
- 2500 ohms load: 8 dBV
Self Noise (typical, equivalent SPL, A-weighted): 8.5 dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight: Net: 494 g. with shock mount and pop filter: 820 g
Connector: Three-pin professional audio (XLR), male
Power Requirements: 11 to 52 Vdc phantom, 6 mA