The sE Electronics sE4400 MKII Matched Pair is a factory-matched stereo set of sE’s redesigned multi-pattern large-diaphragm condensers. Each microphone is hand-tuned and sonically matched at the factory for a virtually identical frequency response — the right choice for stereo drum overheads, piano, choir, room mics, orchestra and any application where matched response between channels matters. Comes complete with both microphones, two shockmounts, stereo bar and a metal flight case.
Configuration
Stereo Pair
Factory matched
Polar Patterns
4 per mic
C / H / O / 8
Max SPL
157 dB
with –20 dB pad
Self-Noise
13 dB(A)
Whisper quiet
Successor to the sE4400a Matched Pair
This is the redesigned 2024 generation pair. Same matched-pair concept and four-pattern flexibility as the older sE4400a, but with the new capsule and housing voiced for a fuller, more musical character on stereo sources.
Features
✓Factory-matched stereo pair — sonically identical frequency response
✓Hand-crafted 1″ gold-sputtered dual-diaphragm capsules
✓Four selectable polar patterns per microphone
✓Switchable –10 dB and –20 dB pads + 40/80 Hz low-cut on each
✓157 dB max SPL — ideal for stereo drum overheads
✓13 dB(A) self-noise — clean on quiet stereo sources (piano, choir, ambience)
✓Die-cast all-metal housings, metal switches, spring steel mesh grilles
✓Includes 2× shockmounts, stereo bar, and metal flight case
Specifications
| Configuration | Factory-matched stereo pair (2× sE4400 MKII) |
| Polar Patterns | Cardioid / Hypercardioid / Omnidirectional / Figure-8 |
| Capsule | Hand-crafted 1″ gold-sputtered dual-diaphragm |
| Frequency Response | 20 Hz – 20 kHz |
| Sensitivity | 25 mV / Pa (–32 dBV) |
| Equivalent Noise | 13 dB(A) |
| Signal-to-Noise | 81 dB |
| Max SPL | 137 dB / 147 dB / 157 dB (no pad / –10 dB / –20 dB) |
| Low-Cut Filter | 40 Hz or 80 Hz @ 6 dB/octave |
| Pad | –10 dB / –20 dB switchable |
| Output Impedance | 22 Ω |
| Weight | 290 g |
| Dimensions | 146 × 58 × 29 mm |
