The SPI-2 Install converts DMX, Art-Net or sACN into SPI to drive digital LED strips, in a DIN-rail housing for fixed installs. It supports the common pixel chips, including WS2811, WS2812B, PSK6812, P943 and UCS9812.
Two group outputs each handle up to 960 pixels. Setup is through the graphic display and front buttons, or through the remote web interface over the network, and all connections use plug-in Phoenix terminals. A wide 5-36 V DC input range covers most strip voltages.
Features
Specifications
| Control mode | Art-Net / DMX / TCP IPv4 |
| sACN | Yes |
| DMX channels | 512 |
| Pixel outputs | 2x 960 |
| Power supply | 5-36 V DC |
| Output voltage | 5-36 V DC |
| Power consumption | 6 W |
| Power connector in | Phoenix |
| DMX connector in / out | Phoenix |
| Data connector in | RJ45 |
| Dimensions (L x W x H) | 106 x 87 x 58 mm |
| Weight | 0.185 kg |
| Housing | Plastic |
| Colour | Grey |
| LED indicators | Data connect / Power / Signal |
| DIN rail spacing | 35 mm |
| IP rating | IP20 (indoor use only) |
| Max ambient temperature | 40 °C |
| Min ambient temperature | 0 °C |
| Min operating temperature | 0 °C |







