Rated 4.9 (173 reviews)
The ColorCue 1 is a 6-channel LED DMX controller built around six colour knobs rather than one fader per colour. Turn the knobs to mix anything from 3-colour RGB to 6-colour RGBWA-UV, then use the single fader to set the output level.
It holds 12 fixed colours and 12 of your own, plus 12 fixed and 12 user chases of up to 99 steps each. Chases run in Manual, Auto run or Sound-controlled mode, and there is dimmer and strobe control on board. The ColorCue series is designed so you can get started within a minute.
6
DMX channels
1
Fader
99
Steps per chase
10 W
Power consumption
Runs from the supplied adapterThe ColorCue 1 is powered by the included AC-DC adapter (12 V DC out) and is rated IP20, indoor use only.
Features
Intelligent single-fader LED DMX controller
6 colour knobs for 3-colour RGB to 6-colour RGBWA-UV fixtures
12 fixed and 12 user colours
12 fixed and 12 user chases with up to 99 steps
Manual, Auto run and Sound-controlled mode
Dimmer and strobe control
Metal housing, 3-pin XLR DMX output
AC-DC power adapter included
Specifications
| Control mode | Built-in Program / Manual / Sound / Static Dimmer |
| DMX channels | 6 |
| Protocol | DMX |
| Buttons | 24 |
| Faders | 1 |
| Power supply | 100-240 V AC 50/60 Hz (Power adapter) |
| Adapter output | 12 V DC, 1500 mA |
| Power consumption | 10 W |
| Power connector in | Low Voltage DC plug |
| DMX connector out | XLR 3P |
| Audio triggers | 1 |
| Dimensions (L x W x H) | 258 x 150 x 79 mm |
| Weight | 1.1 kg |
| Housing | Metal |
| Colour | Grey / Orange |
| LED indicators | Operation mode / Output level |
| IP rating | IP20 (indoor use only) |
| Max ambient temperature | 40 °C |
| Min operating temperature | 0 °C |
| Included accessories | Adapter |
