Rated 4.9 (173 reviews)
The DMT MX30 is a NovaStar all-in-one LED display controller that combines video processing and LED system control. It takes HDMI 2.0 and HDMI 1.4 with loop, DP 1.1 and two 3G-SDI inputs with loop, and drives screens from ten Gigabit Ethernet ports and two 10G optical ports.
A control knob and 3.5-inch TFT screen handle setup on the unit, or use VMP software. SNMP and Art-Net are supported, units cascade over Ethernet, and you get three independent layers, image scaling, 14Ch colour correction, Genlock and display system monitoring in a 19-inch rack format.
HDMI 2.0
Input + loop
Ten
Gigabit Ethernet outputs
2x 10G
Optical outputs
3.5-inch
TFT screen
Check your receiver cardsMX series controllers only support Armor A5s Plus series receiver cards or higher. Older receiver cards like the MRV series are not supported.
Features
One HDMI 2.0 + loop and one HDMI 1.4 + loop
One DP 1.1 input and two 3G-SDI inputs + loop
Ten Gigabit Ethernet outputs and two 10G optical ports
S/PDIF optical port
Genlock input and loop, two network ports and one auxiliary port
Control knob, back button and 3.5-inch TFT screen
VMP software control, cascading over Ethernet, SNMP and Art-Net
Three independent layers, image scaling and 14Ch colour correction
Low latency support and display system monitoring
Mounts in a 19-inch rack
Specifications
| Inputs | one HDMI 2.0 + loop, one HDMI 1.4 + loop, one DP 1.1 and two 3G-SDI inputs + loop |
| Outputs | ten Gigabit Ethernet ports, two 10G optical ports and one S/PDIF optical port |
| Other ports | two network ports and one auxiliary port |
| Sync | Genlock input and loop |
| Front panel | 3.5-inch TFT screen |
| Software | VMP software |
| Protocols | SNMP and Art-Net |
| Layers | three independent layers |
| Colour correction | 14Ch colour correction |
| Receiver cards | Armor A5s Plus series receiver cards or higher |
| Mounting | 19-inch rack |
