Rated 4.9 (173 reviews)
The ColorCue 1 Air is a single-fader LED controller that sends wireless DMX, so you can set colours on stage or around a venue without running a cable to the desk. Six potentiometers tune anything from 3-colour RGB to 6-colour RGBWA-UV fixtures.
Store 12 user colours alongside 12 fixed ones, and build up to 12 chases with up to 99 steps each, run in manual, auto or sound mode. The internal battery lasts up to 12 hours, which makes it a neat fit for temporary event rigs.
6
DMX channels
12 h
Battery runtime
G3
Wireless DMX
99
Steps per chase
Features
Single-fader LED DMX controller with wireless DMX
Controls 3 to 6 colour LEDs (RGB to RGBWA-UV)
12 fixed and 12 user colours
Up to 12 chases with up to 99 steps
Manual, auto run and sound-controlled modes
Internal battery for up to 12 hours
3-pin XLR DMX output
Adapter included
Specifications
| Wireless Mode | G3 |
| Gain (mW) | 10 mW |
| Reaction Time | 8 ms |
| Antenna Type | Omni |
| Antenna Radiation | 360 x 360° |
| Battery Type | Lithium ion |
| Battery Voltage | 7.4 V |
| Capacity | 2.6 Ah |
| Battery Power | 19.24 Wh |
| Runtime @Full | 10 h |
| Runtime Average | 12 h |
| Charging Time | 6 h |
| Control Mode | Built-in Program / Manual / Sound / Static Dimmer |
| DMX Channels | 6 |
| Protocols | DMX |
| Wireless | Wireless DMX |
| Buttons | 25 |
| Faders | 1 |
| Memories | 1212 |
| Power Supply | 9-12 V DC |
| Power Consumption | 10 W |
| Power Connector In | Low Voltage DC plug |
| DMX Connector Out | XLR 3P |
| Audio Triggers | 1 |
| Dimensions (L x W x H) | 258 x 150 x 79 mm |
| Installation Depth (Excl. Connector) | 79 mm |
| Weight | 1.1 kg |
| Rack Units | 3 U |
| IP Rating | IP20 (indoor use only) |
| Housing | Metal |
| Colour | Grey / Red |
| LED Indicators | Battery status / Operation mode / Output level |
| Maximum Ambient Temperature | 40 °C |
| Minimum Ambient Temperature | -5 °C |
| Minimum Operating Temperature | -5 °C |
| Included Cables | None |
| Included Accessories | Adapter |
