The NET-2 Install converts Art-Net or sACN to DMX512 and back, carrying up to 1024 channels over a single CAT5. Both bi-directional DMX ports are optically isolated, and all wiring uses plug-in Phoenix terminals, which suits control cabinets in venues and architectural projects.
Power comes from PoE or the wide range DC input. It can output Art-Net to 2x DMX, take 2x DMX in to Art-Net, clone a DMX input, or HTP/LTP merge sources. Set it up from the front panel display or the remote web interface.
Features
Specifications
| Power supply | 12-36 V DC |
| Power over Ethernet (PoE) | Yes |
| Power consumption | 6 W |
| Power connector | Phoenix |
| DMX in | Phoenix |
| DMX out | Phoenix |
| Data connector | RJ45 |
| Dimensions (L x W x H) | 106 x 87 x 58 mm |
| Weight | 0.18 kg |
| Housing | Plastic |
| Colour | Grey |
| Display | OLED |
| LED indicators | Operation mode / Power / Signal |
| DIN rail spacing | 35 mm |
| Control mode | Art-Net / DMX / TCP IPv4 |
| DMX channels | 1024 |
| Protocols | Art-Net / DMX / RDM / sACN / TCP-IPv4 |
| Universes | 2 |
| IP rating | IP20 (indoor use only) |
| Maximum ambient temperature | 40 °C |
| Minimum operating temperature | 0 °C |






