Rated 4.9 (173 reviews)
The LED Dim-8 HV is the high-voltage version of the LED Dim-8 Install, a compact DIN rail PWM dimmer for long RGBW LED strip runs. It drives two groups of four outputs at up to 8 A per group, 16 A in total, and handles 12 V to 48 V constant voltage strips.
Run it from DMX or as a stand-alone controller for single scenes and chases. Plug-in Phoenix terminals make wiring quick, the OLED display makes setup easy, and the PWM frequency is selectable. It suits networked system integration projects.
16 A
Total output
2 x 4
PWM outputs
12-48 V DC
Voltage
8
DMX channels
Constant voltage onlyIt controls 12 V to 48 V constant voltage LED strips and runs from a 12-48 V DC supply.
Features
Two PWM groups of 4 outputs for RGBW
8 A per group, 16 A in total
For 12 V to 48 V constant voltage LED strips
DMX or stand-alone scenes and chases
Selectable PWM frequency
Plug-in Phoenix terminals
OLED display
DIN rail mount, DIN EN43880 form factor
IR remote control available
Specifications
| Control Mode | DMX / IR / Manual / Remote |
| DMX Channels | 8 |
| Power Supply | 12-48 V DC |
| Output voltage | 12-48 V DC |
| Power Consumption | 5 W |
| Output Current (A) | 16 A |
| Power Connector In | Phoenix |
| DMX Connector In | Phoenix |
| DMX Connector Out | Phoenix |
| Dimensions (L x W x H) | 106 x 87 x 58 mm |
| Weight | 0.22 kg |
| IP Rating | IP20 (indoor use only) |
| Housing | Plastic |
| Colour | Grey |
| LED Indicators | Power / Signal |
| DIN Rail Spacing | 35 mm |
| Maximum Ambient Temperature | 40 °C |
| Minimum Ambient Temperature | 0 °C |
| Minimum Operating Temperature | 0 °C |
