Rated 4.9 (173 reviews)
The DAP Com-art is a PLL UHF wireless audio set made up of one transmitter and one receiver. Both are small, light plug-on units with 3-pin XLR connectors, so the receiver plugs straight into an amplifier or active speaker and the transmitter goes on the source.
Each unit runs from one AA battery or a USB power supply, and a USB-A to Micro USB cable is included. Range is up to 50 metres line of sight in ideal conditions. The 606-630 MHz band is split into 16 channel presets, selected on the unit with a channel and power LED.
16
Channels
50 m
Range (line of sight)
606-630 MHz
UHF band
AA / USB
Power
Stereo needs 2 setsEach Com-art set carries one mono channel. To send a stereo signal you will need 2 sets.
Features
PLL UHF wireless audio set: one transmitter and one receiver
Plug-on design with 3-pin XLR connectors
Range up to 50 m line of sight
16 channel presets across 606-630 MHz
Powered by one AA battery or USB power supply
Frequency response 30 Hz to 17000 Hz
Signal-to-noise ratio > 98 dB
USB-A to Micro USB cable included
Specifications
| Wireless Audio Frequency Start | 606 MHz |
| Wireless Audio Frequency End | 630 MHz |
| RF Power | 10 mW |
| RF Bandwidth | 30 MHz |
| THD Level % | < 0.3 % |
| Signal-to-noise Ratio | > 98 dB |
| Frequency Response Minimum | 30 Hz |
| Frequency Response Maximum | 17000 Hz |
| Mono Input Connector | 3-pin XLR |
| Mono Inputs | 1 |
| Main Outputs | 1 |
| Main Output Connector | 3-pin XLR |
| Battery Type | AA |
| Battery Voltage | 1.5 V |
| Runtime @Full | 5 h |
| Channels | 16 |
| LED Indicators | Channel select / Power |
| Power Supply | 5 V DC |
| Power Connector In | USB |
| Dimensions (L x W x H) | 114 x 23 x 22 mm |
| Housing | Plastic |
| Transmitter Weight | 0.033 kg |
| Colour | Black |
| Included Cables | USB-A – Micro USB cable |
