Rated 4.9 (173 reviews)
The DAP HDMI 2.0 AOC cable uses a hybrid fibre optic design to send HDMI over long distances without latency or loss, where a copper lead would struggle. Being fibre, it is not affected by the EMI and RFI noise that can upset video on busy stages and in venues.
It supports up to 4K at 60 Hz, carries HDR10 signals and is backwards compatible with HDMI 1.4. No external power supply is needed. The connectors are gold plated and the cable has a slim 4.5 mm outer diameter, which makes it easy to run through trunking and truss.
4K
Resolution
60 Hz
Refresh
50 m
Length
No PSU
Power
One direction onlyThe connectors are dedicated transmitter and receiver ends, so the cable works in one direction only. Plug the source end into the source.
Features
HDMI 2.0 active optical fibre cable, male to male
Supports up to 4K at 60 Hz
Carries HDR10 signals
Backwards compatible with HDMI 1.4
No latency or signal loss over long runs
Immune to EMI/RFI line noise
No external power supply required
Gold plated contacts
IP20, indoor use only
Available in different lengths
Specifications
| Maximum Input Resolution | 4096 x 2160 |
| Impedance | 0 Ω |
| Data Connector In | HDMI |
| Data Connector Out | HDMI |
| Cable Length | 50 m |
| Cable Type | Hybrid Fibre Optic |
| Pins | 19 |
| Outer Cable Diameter | 4.5 mm |
| IP Rating | IP20 (indoor use only) |
| Colour | Black |
| Contact Type | Gold plated |
| Conductors | 4 |
