Rated 4.9 (173 reviews)
The DAP DCP-24 MKII is a 4-channel digital crossover with 2 XLR inputs and 4 XLR outputs, made for a 4-part sub/top speaker combination. Each input and output has a 5-band parametric EQ, with crossover, phase reverse, limiter, delay and volume control.
Signal indicators and an LCD display give you an overview at a glance. For deeper setup, connect a computer over USB and use the DAP DSP Control software to fine-tune and protect the system and save or recall up to 50 presets. It suits PA, line arrays, installs and sound distribution networks.
2 x 4
In x out
48 kHz
Sample rate
5 bands
Parametric EQ per I/O
50
User presets
Software setup over USBAdvanced settings and presets are handled in the DAP DSP Control software over the USB-B port. A USB-A to USB-B cable is included.
Features
2 inputs and 4 outputs on 3-pin XLR
48 kHz, 64-bit processing
5 parametric EQs on each input and output
Bessel, Butterworth and Linkwitz Riley crossover filters
Limiter, delay, phase reverse and volume control
50 user presets
LCD display with input and output signal indicators
USB interface and DAP DSP Control software
19″ 1U metal housing
Specifications
| Mono Inputs | 2 |
| Mono Input Connector | 3-pin XLR |
| Mono Input Headroom | 22 dB |
| Mono Input Gain Range | 12 dB |
| Balanced Mono Input Maximum Level | 22 dBu |
| Mono Input Impedance | 10000 Ω |
| Main Outputs | 4 |
| Main Output Connector | 3-pin XLR |
| Main Output Headroom | 9 dB |
| Main Output Maximum Level | 0 dBu |
| Main Output Impedance | 100 Ω |
| THD | < 0.01 % |
| Signal-to-noise Ratio | > 90 dB |
| Audio Latency | 1.27 ms |
| DSP Processor Bitrate | 64-bit |
| Frequency response (min.) | 20 Hz |
| Frequency response (max.) | 20000 Hz |
| Supported Operating Systems | Windows |
| Equalizer Gain Range | 12 dB |
| Parametric Input Equalizer | 5 Bands |
| Parametric Output Equalizer | 5 Bands |
| Input Equalizer Types | Allpass / Bell / High Shelf / Low Shelf / Notch |
| Output Equalizer Types | High Shelf 6 / High Shelf 12 / Low Shelf 6 / Low Shelf 12 |
| Crossover Filter Types | Bessel / Butterworth / Linkwitz Riley |
| Crossover Slopes | 6 / 12 / 24 / 48 dB |
| Dynamics Processing | Limiter |
| Phase Reverse | Yes |
| Limiter Threshold Minimum | -20 dB |
| Limiter Threshold Maximum | 20 dB |
| Limiter Release Time Minimum | 1 ms |
| Limiter Release Time Maximum | 100 ms |
| Output Delay (Max.) | 8 ms |
| User Presets Capacity | 50 |
| Control Mode | Manual / PC Software |
| Display | LCD |
| Power Supply | 220-240 V AC 50 Hz |
| Output voltage | 6 V DC |
| SMPS | Yes |
| Power Consumption | 4 W |
| Power Connector In | Low Voltage DC plug |
| Data Connector In | USB B |
| Cable Length | 1.5 m |
| Installation Depth (Excl. Connector) | 155 mm |
| Flightcase Size | 19″ |
| Rack Units | 1 U |
| LED Indicators | Clip / Input level / Operation mode / Output level / Signal |
| Housing | Metal |
| Colour | Black |
| Weight | 1.9 kg |
| IP Rating | IP20 (indoor use only) |
| Included Cables | USB-A – USB-B cable |
| Included Accessories | Adapter / Software |
| Dimensions (L x W x H) | 155 x 483 x 44 mm |
