Rated 4.9 (173 reviews)
The LTECH 32-channel DMX LED Driver drives thirty-two 3A outputs from one DMX feed, cutting down the number of decoders needed on a big LED installation. It runs from a 12-24 V DC supply and has DMX in and out on 3-pin and 5-pin XLR, RJ45 and terminals, so it daisy-chains easily.
The OLED display shows the DMX address, PWM frequency, mode (Dim, CT, RGB, RGBW), resolution and dimming curve, all set with the built-in buttons. With RDM on board, settings can also be changed from an RDM master console. Built-in circuit protection and photoelectric isolation are included.
32x 3A
Outputs
12-24 V DC
Power supply
DMX / RDM
Control
XLR 3P / XLR 5P
DMX in/out
Indoor use onlyRated IP20 (indoor use only), so mount it in a dry enclosure or plant room rather than outdoors.
Features
32 output channels at 3A each
DMX in and out on 3-pin and 5-pin XLR, plus RJ45 and terminal ports
RDM on board for setup from an RDM master console
OLED display and control buttons for on-unit setup
Modes: Dim, CT, RGB, RGBW
8-bit/16-bit
Multiple dimming curve options
Built-in circuit protection and photoelectric isolation
Specifications
| Control mode | DMX / RDM |
| Display | OLED |
| Bluetooth | No |
| Power supply | 12-24 V DC |
| Power connector in | Open End |
| Power connector out | Open End |
| DMX connector in | XLR 3P / XLR 5P |
| DMX connector out | XLR 3P / XLR 5P |
| Data connector in | RJ45 |
| Data connector out | RJ45 |
| Dimensions (L x H x W) | 300 x 41 x 122 mm |
| Weight | 1.15 kg |
| IP rating | IP20 (indoor use only) |
| Colour | Black |
| Maximum ambient temperature | 55 °C |
| Minimum ambient temperature | -30 °C |
