Rated 4.9 (173 reviews)
The LTECH 4-channel DMX LED Driver gives four high-current 8A outputs under DMX control, with a wide 12-48 V DC supply range. DMX connects on RJ45 ports, and RDM is on board so the unit can be set up from an RDM master console.
In DMX mode the digital display shows the DMX address, PWM frequency, dimming mode (standard or smooth) and grey level. In custom mode it runs built-in lighting effects, with the display showing effect, colour change speed and brightness, which is handy for standalone installs. Built-in circuit protection is included.
4x 8A
Outputs
12-48 V DC
Power supply
DMX / RDM
Control
RJ45
DMX ports
RJ45 DMX connectionDMX signal connects via RJ45 ports, so plan for RJ45 DMX cabling or an adaptor from XLR.
Features
4 output channels at 8A each
RJ45 DMX signal ports
RDM on board for setup from an RDM master console
Digital display and control buttons
Standard or smooth dimming
Custom mode with lighting effects, colour change speed and brightness
8-bit/16-bit
Built-in circuit protection
Specifications
| Control mode | DMX / RDM |
| Bluetooth | No |
| Power supply | 12-48 V DC |
| Power connector in | Open End |
| Power connector out | Open End |
| Dimensions (L x H x W) | 175 x 30 x 46 mm |
| IP rating | IP20 (indoor use only) |
| Colour | Black |
| Maximum ambient temperature | 55 °C |
| Minimum ambient temperature | -25 °C |
