An internal-fit thread adaptor that converts a 3/8″ female stand thread to a 5/8″ male, so US-threaded mic clips and shockmounts will sit on a European stand. The internal design sits flush inside the thread rather than standing proud, with coin slots cut into the face so you can back it out with a screwdriver or a coin when you need the original thread back.
FEMALE THREAD
3/8″
Stand side
MALE THREAD
5/8″
Clip side
DIMENSIONS
12 x 12 x 12mm
H x W x D
FITTING STYLE
Internal
Coin slots
Features
✓
3/8″ female thread to 5/8″ male thread
3/8″ female thread to 5/8″ male thread
✓
Discrete internal design sits flush in the stand thread
Discrete internal design sits flush in the stand thread
✓
Coin slots cut into the face for easy removal
Coin slots cut into the face for easy removal
✓
Lets 5/8″ US-threaded clips and shockmounts fit European stands
Lets 5/8″ US-threaded clips and shockmounts fit European stands
✓
Low profile keeps the mic close to the original stand height
Low profile keeps the mic close to the original stand height
✓
Compact 12mm cube, fits in any mic case pocket
Compact 12mm cube, fits in any mic case pocket
✓
Useful spare for hire stock and touring mic kits
Useful spare for hire stock and touring mic kits
✓
Cheap enough to fit one to every stand in the rack
Cheap enough to fit one to every stand in the rack
Note
This is the internal, coin-slot version. A knurled-ring version of the same 3/8″ to 5/8″ conversion is available as STAN80 if you would rather remove it by hand. Check which way round you need the conversion before ordering, as the reverse 5/8″ to 3/8″ adaptor is a different part.
Specifications
| Stock code | STAN81 |
| Female thread | 3/8″ |
| Male thread | 5/8″ |
| Style | Internal, with coin slots |
| Dimensions (H x W x D) | 12 x 12 x 12mm |
| Weight | 0.1kg |
