A 1m Spectra Series interior-to-exterior DMX cable from LEDJ, joining the IP65 Hydralock connector used on weatherproof fixtures to a standard 5-pin Neutrik XLR. This is the adaptor lead you need when an IP-rated exterior fixture has to sit in the same DMX chain as non-IP indoor kit or a 5-pin desk output. Made in Britain.
LENGTH
1m
Adaptor tail
CONNECTORS
Hydralock / 5-pin
Neutrik XLR
RATING
IP65
Hydralock end
Compatibility
Suits most Elumen8 and LEDJ branded Exterior Spectra Series and Xterior Series fixtures. The Neutrik XLR end is a standard 5-pin, so it will mate with any conventional 5-pin DMX line.
Features
✓
Joins IP65 Hydralock exterior fixtures to standard 5-pin XLR DMX
Joins IP65 Hydralock exterior fixtures to standard 5-pin XLR DMX
✓
IP65 rated Hydralock connector for outdoor and wet-location use
IP65 rated Hydralock connector for outdoor and wet-location use
✓
Genuine Neutrik XLR connector on the standard end
Genuine Neutrik XLR connector on the standard end
✓
1m length keeps the transition tidy at the fixture without adding slack to dress
1m length keeps the transition tidy at the fixture without adding slack to dress
✓
Flexible cable that coils and packs without fighting you
Flexible cable that coils and packs without fighting you
✓
Suits most Elumen8 and LEDJ Exterior Spectra Series and Xterior Series fixtures
Suits most Elumen8 and LEDJ Exterior Spectra Series and Xterior Series fixtures
✓
Worth carrying in pairs so an exterior run can break out at both ends
Worth carrying in pairs so an exterior run can break out at both ends
✓
Made in Britain
Made in Britain
Specifications
| Length | 1m |
| Connectors | LEDJ IP65 Hydralock DMX to 5-pin Neutrik XLR |
| Ingress protection | IP65 (Hydralock end) |
| Series | Spectra Series interior to exterior |
| Stock code | CABL494 |
| Barcode / EAN | 5056742201859 |
| Country of origin | United Kingdom |
