Rated 4.9 (173 reviews)
The LTECH DIN rail DMX LED Driver is built to sit in a control cabinet alongside the rest of an installation. It offers 3x 5A or 4x 4A outputs, up to 16 A maximum output current, from a 5-24 V DC supply, with DMX/RDM signal on terminals.
In DMX mode the digital display shows the DMX address, bit depth, PWM frequency, dimming time and mode (standard or smooth) and screen timeout. Custom mode adds lighting effects with adjustable colour change speed and brightness. RDM is on board for setup from an RDM master console, and built-in circuit protection is included.
3x 5A / 4x 4A
Outputs
16 A
Max output current
5-24 V DC
Power supply
DIN-rail
Mounting
DIN rail mountingDesigned for mounting on a DIN rail, with DMX/RDM signal on terminals rather than XLR.
Features
DIN rail mountable
3x 5A or 4x 4A outputs, 16 A maximum output current
DMX/RDM signal terminals
RDM on board for setup from an RDM master console
Digital display and control buttons
Standard or smooth dimming
Custom mode with lighting effects
8-bit/16-bit
Built-in circuit protection
Specifications
| Control mode | DMX / RDM |
| DMX channels | 512 |
| Dimmable | Yes |
| Bluetooth | No |
| Power supply | 5-24 V DC |
| Maximum output current | 16 A |
| Power connector in | Open End |
| Power connector out | Open End |
| Dimensions (L x H x W) | 112 x 67 x 35 mm |
| Weight | 0.135 kg |
| IP rating | IP20 (indoor use only) |
| Housing | Plastic |
| Colour | White |
| Mounting | DIN-rail |
| Maximum ambient temperature | 50 °C |
| Minimum ambient temperature | -25 °C |
