A 3m 5-pin XLR DMX cable for linking fixtures on the 5-pin DMX512 standard. 3m is the jumper length – enough to daisy chain between adjacent fixtures on a bar or truss without leaving slack hanging, which is why crews tend to buy these in bulk rather than one at a time.
LENGTH
3m
Fixture jumper
CONNECTORS
5-Pin XLR
Male to female
IMPEDANCE
110Ω
True DMX spec
PACKED WEIGHT
0.3kg
PVC jacket
Why 110Ω matters
This is proper 110Ω data cable, not repurposed microphone cable. Mic cable is around 50-75Ω and causes reflections on a DMX line, which shows up as flicker or dropped fixtures at the far end of a long chain. Worth keeping in mind when a rig is made up of a dozen short jumpers – every link in the chain counts.
Features
✓
3m jumper length for daisy chaining fixtures on a bar
3m jumper length for daisy chaining fixtures on a bar
✓
Compact 0.3kg packed weight for carrying in bulk
Compact 0.3kg packed weight for carrying in bulk
✓
5-pin male XLR to 5-pin female XLR
5-pin male XLR to 5-pin female XLR
✓
110Ω impedance cable to DMX specification
110Ω impedance cable to DMX specification
✓
Double shield with foil and braid for interference rejection
Double shield with foil and braid for interference rejection
✓
Heat resistant inner liners protect signal integrity
Heat resistant inner liners protect signal integrity
✓
Water-resistant PVC outer jacket for harsh environments
Water-resistant PVC outer jacket for harsh environments
✓
Clear heatshrink suitable for identification or asset label
Clear heatshrink suitable for identification or asset label
Specifications
| Stock code | CABL186 |
| Length | 3m |
| Connectors | 5-pin male XLR to 5-pin female XLR |
| Impedance | 110Ω |
| Jacket | PVC, water resistant |
| Screening | Double shield, foil and braid |
| Packed dimensions (H x W x D) | 1.8 x 20 x 28cm |
| Packed weight | 0.3kg |
| Barcode / EAN | 0723175520219 |
| Country of origin | China |











