A 10m 5-pin XLR DMX cable for consoles, dimmers and fixtures using the full 5-pin DMX512 connector. The 10m length is the standard console-to-rig run and the one crews keep most of in the truck – long enough to cross a stage or reach the first bar without joining two cables.
LENGTH
10m
Console to rig
CONNECTORS
5-Pin XLR
Male to female
IMPEDANCE
110Ω
True DMX spec
PACKED WEIGHT
0.6kg
PVC jacket
Why 110Ω matters
This is proper 110Ω data cable, not repurposed microphone cable. Mic cable is around 50-75Ω and causes reflections on a DMX line, which shows up as flicker or dropped fixtures at the far end of a long chain. The double shield with foil and braid gives greater interference rejection where DMX runs alongside mains.
Features
✓
10m length for console-to-rig and stage-crossing runs
10m length for console-to-rig and stage-crossing runs
✓
5-pin male XLR to 5-pin female XLR
5-pin male XLR to 5-pin female XLR
✓
110Ω impedance cable to DMX specification
110Ω impedance cable to DMX specification
✓
Double shield with foil and braid for interference rejection
Double shield with foil and braid for interference rejection
✓
Heat resistant inner liners protect signal integrity
Heat resistant inner liners protect signal integrity
✓
Water-resistant PVC outer jacket for harsh environments
Water-resistant PVC outer jacket for harsh environments
✓
Clear heatshrink suitable for identification or asset label
Clear heatshrink suitable for identification or asset label
✓
Suits consoles and fixtures with 5-pin DMX512 connectors
Suits consoles and fixtures with 5-pin DMX512 connectors
Specifications
| Stock code | CABL188 |
| Length | 10m |
| Connectors | 5-pin male XLR to 5-pin female XLR |
| Impedance | 110Ω |
| Jacket | PVC, water resistant |
| Screening | Double shield, foil and braid |
| Packed dimensions (H x W x D) | 3 x 20 x 28cm |
| Packed weight | 0.6kg |
| Barcode / EAN | 0721405350469 |
| Country of origin | China |











