A complete pair of 1.5m DJ plinths supplied with everything needed to stand them up – steel upright frames, base and top plates, white lycra scrims, 35mm speaker spigots and carry bags. Built for mobile entertainers, event companies and wedding work where a clean, symmetrical stage picture has to go up quickly and pack down small.
Height
1.5m
Supplied as a pair
Max load
15kg
Per plinth
Footprint
500 x 500mm
Base plate
Spigot
35mmØ
70mm high
In the kit
Everything for two complete plinths:
4 x upright frames
2 x white lycra scrims
2 x base plates
2 x top plates
16 x fixing knobs
2 x 35mm speaker spigots
2 x carry bags
2 x white lycra scrims
2 x base plates
2 x top plates
16 x fixing knobs
2 x 35mm speaker spigots
2 x carry bags
Typical uses
Where these earn their keep:
Mobile DJ rigs
Weddings
Corporate events
Speaker risers
Lighting positions
Weddings
Corporate events
Speaker risers
Lighting positions
Features
✓
All-in-one kit – supplied as a pair with fixings, scrims and bags
All-in-one kit – supplied as a pair with fixings, scrims and bags
✓
Tool-free design using fixing knobs for rapid setup
Tool-free design using fixing knobs for rapid setup
✓
Steel upright frames and base plates for a sturdy structure
Steel upright frames and base plates for a sturdy structure
✓
3mm top and base plates with cutout carry handles
3mm top and base plates with cutout carry handles
✓
Top plate pre-drilled for mounting lighting fixtures
Top plate pre-drilled for mounting lighting fixtures
✓
35mm speaker spigot bolts to the top plate for top-mounted cabs
35mm speaker spigot bolts to the top plate for top-mounted cabs
✓
White lycra scrims give a clean finish and can be uplit from inside
White lycra scrims give a clean finish and can be uplit from inside
✓
15.3kg per plinth complete – two-trip loadable by one person
15.3kg per plinth complete – two-trip loadable by one person
✓
1 year warranty
1 year warranty
Note
Maximum load is 15kg per plinth. Check the weight of your speaker or fixture before top-mounting – many 12in and 15in powered cabs exceed this.
Specifications
| Type | 1.5m DJ plinth kit, supplied in pairs |
| Max load | 15kg |
| Footprint (W x D) | 500 x 500mm |
| Top plate (H x W x D) | 3 x 300 x 300mm |
| Base plate (H x W x D) | 3 x 500 x 500mm |
| Speaker spigot (H x W) | 70 x 35mmØ |
| Weight per plinth | 15.3kg complete |
| Scrim | White lycra, one per plinth |
| Stock code | EQLED124 |
| Warranty | 1 year |
