Rated 4.9 (112 reviews)
A 2m 3-pin XLR DMX cable in a white PVC sheath, running signal from a lighting console to dimmers, LED fixtures or anything else that speaks DMX. At 2m this is the short jumper you want between adjacent fixtures on a bar or between two units in a truss cell – and the white jacket keeps it discreet against white truss, drape or exhibition stands.
2m
LENGTH · Fixture to fixture
3-Pin XLR
CONNECTORS · Male to female
110Ω
IMPEDANCE · True DMX spec
White
SHEATH · PVC, water resistant
Why 110Ω mattersThis is proper 110Ω data cable, not repurposed microphone cable. Mic cable is around 50-75Ω and causes reflections on a DMX line, which shows up as flicker or dropped fixtures at the far end of a long chain. The double shield with foil and braid gives greater interference rejection where DMX runs alongside mains.
Features
2m length for short fixture-to-fixture jumps
White PVC outer jacket blends with white truss and drape
3-pin male XLR to 3-pin female XLR
110Ω impedance cable to DMX specification
Double shield with foil and braid for interference rejection
Heat resistant inner liners protect signal integrity
Water-resistant PVC jacket for harsh environments
Clear heatshrink suitable for identification or asset label
Specifications
| Stock code | CABL206 |
| Length | 2m |
| Connectors | 3-pin male XLR to 3-pin female XLR |
| Impedance | 110Ω |
| Jacket | White PVC, water resistant |
| Screening | Double shield, foil and braid |
| Packed dimensions (H x W x D) | 28 x 1.5 x 16cm |
| Packed weight | 0.1kg |
| Barcode / EAN | 0723175520233 |
| Country of origin | China |
