Rated 4.9 (112 reviews)
A 20m 5-pin XLR DMX cable for long data runs on the 5-pin DMX512 standard. This is the length that gets signal from front-of-house to the stage, or from a dimmer world across to an outlying tower, without dropping a coupler into the middle of the line. Double shielded and built on 110Ω data cable, which matters more the longer the run gets.
20m
LENGTH · FOH to stage
5-Pin XLR
CONNECTORS · Male to female
110Ω
IMPEDANCE · True DMX spec
1kg
PACKED WEIGHT · PVC jacket
Why 110Ω matters on long runsThis is proper 110Ω data cable, not repurposed microphone cable. Mic cable is around 50-75Ω and causes reflections on a DMX line, which shows up as flicker or dropped fixtures at the far end of a chain – and the effect gets worse the longer the run. The double shield with foil and braid gives greater interference rejection where a 20m run has to share a route with mains.
Features
20m length for front-of-house to stage data runs
Single unbroken run avoids couplers mid-line
5-pin male XLR to 5-pin female XLR
110Ω impedance cable to DMX specification
Double shield with foil and braid for interference rejection
Heat resistant inner liners protect signal integrity
Water-resistant PVC outer jacket for harsh environments
Clear heatshrink suitable for identification or asset label
Specifications
| Stock code | CABL189 |
| Length | 20m |
| Connectors | 5-pin male XLR to 5-pin female XLR |
| Impedance | 110Ω |
| Jacket | PVC, water resistant |
| Screening | Double shield, foil and braid |
| Packed dimensions (H x W x D) | 5 x 20 x 28cm |
| Packed weight | 1kg |
| Barcode / EAN | 0721405350476 |
| Country of origin | China |
