A 2U 19″ steel rack panel from Penn Elcom, punched for four G-Series Neutrik speakON connectors. This is the standard way to bring amplifier outputs out to the front or rear of a rack on a serviceable panel rather than a loose loom – populate it, label it, and any engineer can patch the rack without opening it up. Black powder coated 1.2mm steel, so it stays flat and takes repeated patching without distorting.
Rack size
2U
19″ standard
Punched for
4 x G type
Neutrik speakON
Material
1.2mm steel
18 gauge
Weight
0.48kg
88 x 483 x 10mm
Note
The panel is supplied punched only – connectors are not included. Order the G-Series Neutrik speakON connectors separately, and check whether you need NL4 or NL8 before you buy.
Features
✓
2U panel for standard 19″ racks and flight cases
2U panel for standard 19″ racks and flight cases
✓
Punched for 4 x G-Series Neutrik speakON connectors
Punched for 4 x G-Series Neutrik speakON connectors
✓
1.2mm / 18 gauge steel resists flexing under patching
1.2mm / 18 gauge steel resists flexing under patching
✓
Black powder coated finish matches standard rack hardware
Black powder coated finish matches standard rack hardware
✓
Penn Elcom R1204/2UK, a known part for spares and rebuilds
Penn Elcom R1204/2UK, a known part for spares and rebuilds
✓
Ideal for amplifier rack speaker output panels
Ideal for amplifier rack speaker output panels
✓
Flat face takes engraved or printed channel labelling
Flat face takes engraved or printed channel labelling
✓
Light at 0.48kg, no meaningful load on the rack strip
Light at 0.48kg, no meaningful load on the rack strip
Specifications
| Stock code | PENN128 |
| Manufacturer part | R1204/2UK |
| Rack size | 2U, 19″ |
| Punching | 4 x G type (Neutrik speakON) |
| Material | 1.2mm / 18 gauge steel |
| Finish | Black powder coated |
| Dimensions (H x W x D) | 88 x 483 x 10mm |
| Weight | 0.48kg |











