A system controller for IP-9000 series endpoints. Installed on the video network, it discovers the transmitters and receivers and gives one Web GUI for routing video, audio, IR, RS-232 and USB, with drag and drop switching, presets and video wall setup. Its second LAN port lets a separate control network reach the AV network without bridging the two.
2x RJ45
LAN ports
8
Trigger inputs
1080p60
HDMI GUI output
802.3af
PoE
Controller only, PSU not includedManages IP-9000TX and IP-9000RX units and carries no AV signal itself. It can run on 802.3af PoE; otherwise the 5V/2.6A adaptor (PSU-5V2.6A-L) is ordered separately.
Features
One Web GUI to manage and route all IP-9000 transmitters and receivers
Unicast and multicast routing, matrix and video wall modes
Independent routing of video, audio and control signals
Dual LAN ports for separate AV and control networks
HDMI output shows the Web GUI locally with USB mouse and keyboard
8 trigger inputs for single-button macros from a keypad
Control via Web GUI, RS-232, Telnet and IR remote
CYP list Control4, Crestron, AMX, RTI and Q-SYS drivers
Specifications
| Brand | CYP |
| Model | IP-CS9000 |
| Network | 2x RJ45 |
| Video output | 1x HDMI (GUI display) |
| Output resolution | 1920×1080@60, HDMI 1.4 |
| Control ports | RS-232 (3-pin Phoenix), IR in (3.5mm), 8x trigger (10-pin Phoenix), USB Type-A |
| Control | Web GUI, RS-232, Telnet, IR |
| Compatibility | IP-9000TX, IP-9000RX |
| Power | 5V/2.6A DC locking or PoE 802.3af (PSU not supplied) |
| Power consumption | 2.99W |
| Dimensions (WxHxD) | 231.5 x 25 x 108mm |
| Weight | 640g |





