An HDMI encoder for CYP’s IP-9000 series, sending 4K60 4:4:4 video with HDR and Dolby Vision, plus audio, IR, RS-232 and USB 2.0, across a gigabit network. Each cable run between unit and switch can be up to 100m, and it works point to point in unicast or out to many receivers in multicast for matrix and video wall systems. Pair it with IP-9000RX receivers and add the IP-CS9000 controller on larger installs.
4K60 4:4:4
Max resolution
1Gbps
Network
100m
Per cable run
802.3af
PoE
Power supply not includedRuns from an 802.3af PoE switch port. Without PoE, the 12V/1.25A adaptor (CYP order code PSU-12V1.25A-L) must be ordered separately.
Features
4K60 4:4:4 over 1G Ethernet with HDR10, HDR10+, Dolby Vision and HLG
Less than one frame of latency at 4K60 (manufacturer figure)
Unicast and multicast modes for matrix routing and video walls
USB 2.0 over IP for keyboard, mouse, flash drives and webcams
Bi-directional IR and RS-232 pass-through
HDMI loop output for a local monitor
Analogue line input embedded into the stream and routable to any receiver
Dante Ready: Dante audio can be activated later in Dante Controller
Specifications
| Brand | CYP |
| Model | IP-9000TX |
| Video input | 1x HDMI |
| Loop output | 1x HDMI |
| Network | 1x RJ45 Gigabit (PoE) |
| Max resolution | 4096×2160@60, 8-bit RGB |
| HDMI / HDCP | HDMI 2.0 / HDCP 2.2 |
| HDR | HDR10, HDR10+, Dolby Vision, HLG |
| Audio | 8ch LPCM, Bitstream; 3.5mm line in and out |
| Distance | 100m per segment via Gigabit switches |
| USB | USB 2.0 over IP |
| Control | Web GUI, Telnet, IP-CS9000 controller |
| Power | PoE 802.3af or 12V/1.25A (PSU not supplied) |
| Power consumption | 7.19W |
| Dimensions (WxHxD) | 231.5 x 25 x 108mm |
| Weight | 700g |





