Rated 4.9 (112 reviews)
An audio-only encoder for adding source points to an IP-7000 AV over IP network. It takes analogue line, microphone and optical inputs and sends them over the gigabit LAN to IP-A750RX receivers, with up to 100m of Cat cable between each unit and the switch. Setup and routing are handled through the IP-CS7 controller.
Line, mic, optical
Inputs
1G
Network
100m
Unit to switch
PoE
Power
Needs IP-CS7 controller; PSU not includedCYP state the unit is controlled through the IP-CS7 web interface. It runs on PoE; the mains adaptor is sold separately (CYP web lists PSU-5V1.2A-L).
Features
Audio-only transmitter for IP-7000 series systems
3.5mm stereo line input, 3.5mm mic input and TOSLINK optical input
Up to 100m of Cat5/6 between unit and network switch
Volume control knob on the unit
IP to RS-232 bridging for serial device control
LEDs for power, link and input status
Field-updatable firmware
Specifications
| Brand | CYP |
| Model | IP-A750TX |
| Inputs | 1x TOSLINK, 1x 3.5mm stereo line, 1x 3.5mm mic |
| Network | 1x RJ45 Gigabit (PoE) |
| Control port | RS-232 (3-pin Phoenix) |
| Optical in | 2ch LPCM, Bitstream |
| Line in | 2 Vrms, S/N >98dB |
| Mic in | S/N >82dB |
| Distance | 100m Cat5/6 to switch |
| Control | IP-CS7 Web GUI |
| Power | PoE or DC adaptor (not supplied) |
| Power consumption | 2.27W |
| Dimensions (WxHxD) | 128 x 25 x 108mm |
| Weight | 380g |
