Rated 4.9 (112 reviews)
Taking audio off a Dante network, the AU-DTO4-RX delivers up to four channels to balanced analogue outputs on 3-pin terminal blocks. Volume and mute are configurable per output, and the unit runs entirely from PoE, so one network cable carries both audio and power. Typical jobs include feeding powered speakers, amplifiers or a local mixer at the far end of a Cat5e or Cat6 run.
4
Balanced outputs
4Vrms
Max output level
PoE
802.3af power
~1ms
Typical latency
PoE switch and Dante software neededThe AU-DTO4-RX is powered only by PoE (802.3af) from the network switch, with no local power input listed. Basic setup needs a serial over USB connection, and audio routing is done in third-party Dante control software.
Features
Four balanced analogue mono outputs on 3-pin terminal blocks
Configurable volume and mute per output
Receives up to 4 channels from any Dante source
Powered by PoE (802.3af) from the network switch
Low latency, typically around 1ms
Setup via serial over USB, routing via Dante control software
Specifications
| Brand | CYP |
| Model | AU-DTO4-RX |
| Network | 1x RJ45 Dante |
| Outputs | 4x balanced analogue mono (3-pin terminal block) |
| Service port | USB Micro |
| Max output level | 4Vrms |
| Output impedance | 499Ω |
| S/N ratio | >87dB (1kHz, 0dBFS) |
| Latency | Typically around 1ms |
| Power | PoE (802.3af) |
| Power consumption | 6W |
| Chassis | Aluminium, black |
| Dimensions | 128 x 25 x 108mm (W x H x D) |
| Weight | 360g |
