The Elumen8 CABL875 is a 3m adapter cable from a 16A 240V PCE inlet to a Neutrik powerCON output, built on 2.5mm H07RN-F rubber-sheathed cable. The longer reach is useful when the powerCON-fed fixture or amplifier sits a metre or two off the distro point.
LENGTH
3 m
Adapter run
CABLE
2.5 mm²
H07RN-F
INPUT
16A 3-Pin
PCE male
OUTPUT
powerCON
Neutrik
powerCON variant
This adapter terminates in standard powerCON (NAC3FCA), the legacy blue-keyed connector used on a wide range of moving heads, LED fixtures and amplifiers. For TRUE1 TOP equipment, see the matching CABL348/674/675/679 range.
Features
✓
2.5mm H07RN-F flexible rubber-sheathed cable
2.5mm H07RN-F flexible rubber-sheathed cable
✓
PCE 16A 3-pin male inlet
PCE 16A 3-pin male inlet
✓
Neutrik powerCON output for fixtures and amplifiers
Neutrik powerCON output for fixtures and amplifiers
✓
3m length covers short distro to fixture runs
3m length covers short distro to fixture runs
✓
Clear heatshrink at each end ready for asset labelling
Clear heatshrink at each end ready for asset labelling
✓
Touring-grade construction for repeated rig and de-rig
Touring-grade construction for repeated rig and de-rig
Specifications
| Brand | Elumen8 |
| SKU | CABL875 |
| Length | 3m |
| Conductor | 2.5mm² |
| Cable type | H07RN-F flexible rubber-sheathed |
| Input | PCE 16A 3-pin male |
| Output | Neutrik powerCON |
| Voltage | 240V single phase |











