The 1510 is the case you see coming off every touring flight case trolley and out of every camera department — Peli built it to the maximum airline carry-on size, so a radio mic rack, a camera body and lenses, or a laptop and interface travels in the cabin with you rather than in the hold. Watertight to IP67, rated from −40 °C to +87.8 °C, and certified to DEF STAN 81-41. Supplied here empty, ready for your own foam or dividers.
5.44 kg
Empty weight
IP67
Ingress rating
Cabin size
Carry-on design
Lifetime
Peli guarantee
Cabin baggage — check your carrierPeli designs the 1510 to the maximum airline carry-on size, but cabin baggage allowances vary by airline and by aircraft. Confirm your carrier’s exact dimensions and weight limit before you travel — particularly on regional turboprop and single-aisle short-haul routes, where hold-stowage is common regardless of case size.
Supplied empty — no foamThis is the no-foam configuration. The matching four-piece foam set (Peli 1511, part 1510-400-000) is sold separately and drops straight in, as do TrekPak and padded divider sets.
Features
Built to maximum airline carry-on size
Double-throw latches
O-ring seal with automatic pressure equalisation valve
Two wheels and retractable extending handle
Stainless steel padlock protectors, 8 mm padlock hole
Moulded nameplate for asset marking
DEF STAN 81-41 certified; MIL-STD-810G fungus tested
29.1 kg buoyancy
Specifications
| Interior dimensions | 502 × 279 × 193 mm (L × W × D) |
| Exterior dimensions | 559 × 351 × 229 mm (L × W × D) |
| Lid / base depth | 45 mm / 147 mm |
| Interior volume | 0.027 m³ |
| Weight (empty) | 5.44 kg |
| Buoyancy | 29.1 kg |
| Ingress protection | IP67 — watertight to 1 m for 30 minutes |
| Certification | DEF STAN 81-41; MIL-STD-810G (fungus) |
| Temperature range | −40 °C to +87.8 °C |
| Body material | Polypropylene |
| Latch / pin material | ABS / stainless steel |
| Colour | Black |
| Warranty | Peli Limited Lifetime Guarantee |





