Rated 4.9 (79 reviews)
The full four-piece replacement foam set for the Peli 1510 Protector Case — Peli’s own part 1510-400-000, catalogued globally as the 1511. Two layers of pre-scored Pick N Pluck base foam let you tear a bespoke cavity for your kit in a few minutes without a knife or a CNC quote, while the convoluted lid foam holds everything down against the closed lid. The correct replacement when the original foam in a working case has compressed, absorbed moisture, or been plucked for a job you no longer run.
4 pieces
Complete set
Pick N Pluck
Pre-scored base
1510 / 1510M
Fits
Foam is not covered by the case guaranteePeli’s Limited Lifetime Guarantee applies to the case itself — it expressly excludes contents and foam. Foam is a wear item; plan on replacing it periodically in hire stock and heavy touring use.
Plucking guidancePeli recommend leaving at least 25 mm of foam between your equipment and the case wall. Lay the kit on the foam, mark the outline, and pluck one square at a time — you cannot put the squares back.
Features
Genuine Peli foam, cut to the exact 1510 interior
Two Pick N Pluck layers, pre-scored in 19 × 13 mm squares
Convoluted lid foam retains contents against the lid
Solid base layer protects the case floor
No tools required to configure
Also fits the 1510M Protector Mobility Case
Specifications
| Peli part number | 1510-400-000 (catalogued as 1511) |
| Set contents | 4 pieces — see breakdown below |
| Lid foam | 1 × convoluted, 46 mm |
| Base foam | 1 × solid, 13 mm |
| Pick N Pluck layers | 2 × 67 mm, pre-scored |
| Material | Polyurethane |
| Compatibility | Peli 1510 Protector Case; Peli 1510M Protector Mobility Case |
