Rated 4.9 (120 reviews)
A 0.25m link cable terminated with a Neutrik powerCON B-type (grey, drain) and a Neutrik powerCON TRUE1 at the opposite end. Built on 1.5mm² Titanex H07RN-F rubber sheath, this jumper bridges drain-side powerCON B fixtures to TRUE1 inputs in mixed-vintage rigs.
0.25 m
Length · Jumper
1.5 mm²
Cable · Titanex H07RN-F
powerCON B
End A · Grey, drain
TRUE1
End B · Neutrik
Connector orientationpowerCON A (blue) is the supply side and B (grey) is the drain side, the two are mechanically keyed so they cannot be cross-connected. This jumper takes a powerCON B drain output through to TRUE1, confirm signal flow before chaining fixtures.
Features
Neutrik powerCON B and TRUE1 connectors
1.5mm² Titanex H07RN-F rubber sheath
Short 0.25m length for tight daisy-chains
Clear heat-shrink for ID / asset label
Bridges legacy powerCON B to TRUE1
Rubber sheath for touring abuse
Specifications
| Brand | Elumen8 |
| SKU | CABL426 |
| Length | 0.25 m |
| Cable | 1.5 mm² Titanex H07RN-F, 3-core rubber |
| Connector A | Neutrik powerCON B-type (grey, drain) |
| Connector B | Neutrik powerCON TRUE1 |
| Labelling | Clear heat-shrink for asset tag |
