A 2m feed cable that takes a standard 13A UK mains supply into a PowerTwist TR1 IP65 circuit via a Seetronic SAC3FX connector. Built on Titanex H07RN-F 1.5mm² tough rubber sheathed cable and rated at 16A, it is the practical way to run outdoor festoon or weatherproof LED from an ordinary socket at a marquee, bar or shopfront. Assembled in Britain.
2m
Length · Socket to first fixture
16A
Cable rating · 1.5mm² H07RN-F
TR1 IP65
Output · Seetronic SAC3FX
Supply side limits the circuitThe cable itself carries a 16A rating, but a 13A UK plug is fused at 13A, so that fuse sets the ceiling for everything downstream. Work out the total load of the PowerTwist run before you plug in, and remember the 13A plug top is not weatherproof – keep it indoors or in a protected outdoor socket.
Features
2m length – reaches a wall socket from a nearby festoon anchor without excess slack
Short enough to stay off the floor in a bar or marquee where trip hazards matter
Seetronic SAC3FX connector, intermateable with the PowerTwist TR1 IP65 range
Titanex H07RN-F 1.5mm² tough rubber sheathed cable
16A current rating
Clear heatshrink at the connector for asset labelling or hire stock identification
Rubber sheath stays flexible in the cold and takes site handling
Made in Britain
Specifications
| Length | 2m |
| Supply connector | 13A UK plug |
| Output connector | Seetronic SAC3FX, PowerTwist TR1 IP65 |
| Cable | Titanex H07RN-F, 1.5mm² |
| Current rating | 16A |
| Country of origin | United Kingdom |
| Stock code | CABL1018 |





