The Elumen8 CABL299D is a 5m T-Connect to powerCON adaptor lead built on 2.5mm H07RN-F rubber cable, terminated in a PCE 16A T-Connect and a Neutrik powerCON NAC3FCA. The 5m length is well suited to bridging the gap between truss bars or making the first run from a sub-distro into a chain of powerCON-equipped fixtures.
5m
LENGTH
16A
RATING · 240V single phase
2.5mm
CABLE · H07RN-F
T-Connect / powerCON
CONNECTORS
PCE T-Connect daisy chainingPCE T-Connect is a through-rated 16A connector that mates male and female on the same body, letting a single 16A feed tee off to each fixture in turn. Total chain load must stay within the 16A rating.
Features
2.5mm H07RN-F rubber-sheathed cable
PCE 16A T-Connect for daisy-chained power feeds
Neutrik powerCON NAC3FCA termination
Rated 16A at 240V single phase
Suited to lighting fixtures and powered audio with powerCON inlets
5m length suits sub-distro to first fixture or truss-to-truss runs
NoteThe powerCON end is the original NAC3FCA blue connector, not powerCON TRUE1 or TRUE1 TOP. Check the inlet on the receiving fixture before ordering.
Specifications
| SKU | CABL299D |
| Length | 5m |
| Cable | 2.5mm H07RN-F |
| Connector A | PCE 16A T-Connect |
| Connector B | Neutrik powerCON NAC3FCA |
| Rating | 16A, 240V single phase |
| Brand | Elumen8 |





