Rated 4.9 (99 reviews)
A 0.25m balanced patch lead from Elumen8, terminated with a 3-pole 6.35mm (1/4″) TRS jack at one end and a 3-pin NC3FXX female XLR at the other. At a quarter of a metre this is strictly a rack-internal jumper, made for tying an XLR output into the jack input of the processor directly above or below it with no slack to dress away.
0.25m
LENGTH · Rack jumper
2 x 0.51mm²
CONDUCTORS · 20AWG
90%
SCREEN · Braided tinned copper
6mm
CABLE OD · PVC jacket
Features
0.25m finished length for rack-internal jumpers
3-pole 6.35mm (1/4″) TRS jack to 3-pin NC3FXX female XLR, balanced throughout
Neutrik connectors
Braided tinned copper screen with 90% coverage
Super flexible PVC outer jacket with cotton stuffing
Clear heatshrink at each end for asset labelling or ID
Heat resistant construction
Made in Britain
NoteThis is the female XLR variant, so it takes a feed out of an XLR output. If you need to feed an XLR input from a jack output, order the male XLR version instead.
Specifications
| Length | 0.25m |
| Connector A | 3-pole 6.35mm (1/4″) TRS jack |
| Connector B | 3-pin NC3FXX female XLR |
| Conductors | 2 x 0.51mm² (20AWG) |
| Screen | Braided tinned copper, 90% coverage |
| Outer diameter | 6mm |
| Jacket | Super flexible PVC, cotton stuffed |
| Colour | Silver |
| SKU | CABL2530 |
