A 20m touring-grade CAT5e cable terminated in Neutrik etherCON connectors, built on stranded bare copper cores with a foil screen and a super flexible PVC jacket. It is the right cable for network audio, lighting control and digital snake runs where a moulded RJ45 patch lead would not survive the load-out. Assembled in Britain.
20m
Length · Stage to FOH run
CAT5e
Category · 4 pairs, screened
etherCON
Connectors · Neutrik chuck strain relief
Stranded
Conductors · Bare copper
Stranded, not solid coreStranded conductors are what make this a touring cable rather than an installation one. Solid-core CAT5e work-hardens and fractures when it is repeatedly coiled and flexed; stranded cores keep taking the abuse of daily rig and de-rig. Use solid core for permanent structured cabling, stranded for anything that goes in a case.
Features
20m length – a practical stage-to-FOH or console-to-stagebox run in most venues
Stranded bare copper cores for repeated coiling and flexing on tour
4 pairs inside an aluminium/polyester foil screen plus drain wire
Screen and drain help reject interference alongside dimmer and mains runs
Polyethylene foam inner core insulation
Super flexible PVC outer jacket that coils flat and does not fight the drum
Unique Neutrik chuck-type strain relief protects the termination
Intermateable with the existing etherCON CAT5 range
Clear heatshrink for asset labelling or hire stock identification
Made in Britain
Specifications
| Length | 20m |
| Category | CAT5e |
| Conductors | Stranded bare copper |
| Construction | 4 pairs, aluminium/polyester foil screen plus drain wire |
| Inner insulation | Polyethylene foam |
| Outer jacket | Super flexible PVC |
| Connectors | Neutrik etherCON, chuck-type strain relief |
| Country of origin | United Kingdom |
| Stock code | CABL1580 |





