Rated 4.9 (99 reviews)
A 5m IP-rated DMX crossover lead from LEDJ with a Hydralock Male on one end and a Seetronic IP 3-Pin Female XLR on the other. Lets you carry the DMX output from a Hydralock-terminated IP fixture chain back into a standard 3-Pin XLR fixture or onward run.
5 m
LENGTH · Run length
Hydralock M / 3-Pin XLR F
CONNECTORS · LEDJ / Seetronic IP
IP-rated
PROTECTION · Sealed connectors
CABL528
SKU · LEDJ
Crossover CableThe Hydralock Male feeds out of a LEDJ Spectra or Fresco fixture chain; the Seetronic IP 3-Pin Female XLR mates with any standard 3-Pin XLR Male, IP-rated or otherwise. Use this lead at the end of an outdoor Hydralock run to drop into a standard XLR fixture, splitter, or a final IP-rated 3-Pin termination.
Features
LEDJ Hydralock Male connector
Seetronic IP 3-Pin Female XLR with internal moisture seals
Bridges Hydralock fixture chains into standard 3-Pin DMX runs
Cross-compatible with standard 3-Pin XLR fixtures and splitters
5 m run, typical fixture-to-fixture spacing on uplighter rigs
Suited to outdoor and damp-environment use when fully mated
NoteIP integrity is only maintained when the connector is fully mated with a compatible IP-rated counterpart. Mating to a standard plastic-shell XLR will work electrically but will not seal.
Specifications
| Brand | LEDJ |
| SKU | CABL528 |
| Length | 5 m |
| Connector A | LEDJ Hydralock Male |
| Connector B | Seetronic IP 3-Pin Female XLR |
| Application | Outdoor / IP DMX patching, system bridging |
