Titanex H07RN-F 150mm² single-core heavy-duty rubber cable on a 100m drum. The largest single-core CSA in common festival and touring use, sized for headline-stage generator tails and major site supply runs at currents up to ~363A per conductor. One length of one phase per drum — assemble multiple drums for a full 5-conductor 3-phase + N + PE feed.
CONDUCTOR
1 core
150mm² CSA
CURRENT (in air)
~363A
single conductor
VOLTAGE
450 / 750V
U0/U rated
DRUM LENGTH
100m
single coil
Powerlock 400A terminations
150mm² single-core H07RN-F is regularly specified for 400A 3-phase generator tails where 120mm² would otherwise be marginal under high ambient temperatures or long runs. Drum weight is substantial — cable jack stands and a forklift / pump trolley are essential for safe deployment.
Note
Sheath colour is supplied as standard black unless otherwise specified at order; for L1/L2/L3/N/PE colour-coded bundles, contact us before ordering to confirm available colours and lead times.
Features
✓Class 5 fine-stranded copper conductor for repeated flexing
✓EPR (ethylene propylene rubber) insulation
✓Polychloroprene (CR) outer sheath, oil and abrasion resistant
✓UV stable for outdoor festival and event use
✓Suitable for direct laying on the ground without protection
✓Resistant to most oils, acids and chemicals
✓HAR-approved to EN 50525-2-21 / HD 22.4
✓Suitable for Powerlock / Camlok 400A terminations
Specifications
| Cable type | H07RN-F |
| Conductor cross-section | 150mm² |
| Number of cores | 1 |
| Conductor class | Class 5 (fine wire), bare copper |
| Insulation | EPR rubber (EI4) |
| Sheath | Polychloroprene rubber (EM2) |
| Voltage rating | 450 / 750V (U0/U) |
| Test voltage | 2,500V |
| Temperature range (flexing) | -25°C to +60°C |
| Standards | EN 50525-2-21, HD 22.4 S4, VDE 0282-4 |
| Drum length | 100m |
| SKU | CABL507 |
