Titanex H07RN-F 16mm² 3-core heavy-duty rubber cable on a 200m drum. Sized for high-current single-phase feeds typically up to 80A — ideal for stage left/right distro feeds, audio mains drops and longer-run extensions where 10mm² would be marginal on volt-drop.
CONDUCTORS
3 core
L, N, E — 16mm²
CURRENT (in air)
~84A
single circuit
VOLTAGE
450 / 750V
U0/U rated
DRUM LENGTH
200m
single coil
Sizing rationale
Stepping up from 10mm² to 16mm² gives substantial headroom for 63A feeds run over 50m+ where volt-drop becomes the limiting factor, or supports up to 80A circuits where the protection device is rated accordingly. Always derate for ambient temperature and grouping in line with BS 7671.
Features
✓Class 5 fine-stranded copper conductors for repeated flexing
✓EPR (ethylene propylene rubber) insulation
✓Polychloroprene (CR) outer sheath, oil and abrasion resistant
✓UV stable for outdoor festival and event use
✓Suitable for direct laying on the ground without protection
✓Resistant to most oils, acids and chemicals
✓HAR-approved to EN 50525-2-21 / HD 22.4
✓Single-piece 200m supply — no factory joints
Specifications
| Cable type | H07RN-F |
| Conductor cross-section | 16mm² |
| Number of cores | 3 (L + N + E) |
| Conductor class | Class 5 (fine wire), bare copper |
| Insulation | EPR rubber (EI4) |
| Sheath | Polychloroprene rubber (EM2) |
| Voltage rating | 450 / 750V (U0/U) |
| Test voltage | 2,500V |
| Temperature range (flexing) | -25°C to +60°C |
| Standards | EN 50525-2-21, HD 22.4 S4, VDE 0282-4 |
| Drum length | 200m |
| SKU | CABL334B |
