The Elumen8 CABL299 is a 1m T-Connect to powerCON adaptor lead built on 2.5mm H07RN-F rubber cable, terminated in a PCE 16A T-Connect and a Neutrik powerCON NAC3FCA. The 1m length keeps cable clutter to a minimum when daisy-chaining fixtures sat close together on a truss bar or floor pack.
1m
LENGTH
16A
RATING · 240V single phase
2.5mm
CABLE · H07RN-F
T-Connect / powerCON
CONNECTORS
PCE T-Connect daisy chainingPCE T-Connect is a through-rated 16A connector that mates male and female on the same body, letting a single 16A feed tee off to each fixture in turn. Total chain load must stay within the 16A rating.
Features
2.5mm H07RN-F rubber-sheathed cable
PCE 16A T-Connect for daisy-chained power feeds
Neutrik powerCON NAC3FCA termination
Rated 16A at 240V single phase
Suited to lighting fixtures and powered audio with powerCON inlets
1m length minimises clutter between adjacent fixtures
NoteThe powerCON end is the original NAC3FCA blue connector, not powerCON TRUE1 or TRUE1 TOP. Check the inlet on the receiving fixture before ordering.
Specifications
| SKU | CABL299 |
| Length | 1m |
| Cable | 2.5mm H07RN-F |
| Connector A | PCE 16A T-Connect |
| Connector B | Neutrik powerCON NAC3FCA |
| Rating | 16A, 240V single phase |
| Brand | Elumen8 |





