Elumen8 adhesive-lined heatshrink tubing in a 19mm (3/4″) supplied diameter with a high 3:1 shrink ratio, supplied as a 1.2m length. The dual-wall sleeving seals and insulates cable joints, connector backshells and repairs on medium-gauge cable, giving a watertight, strain-relieving finish. A useful stick size for cable techs and installers sealing touring and outdoor cabling.
SHRINK RATIO
3:1
Dual-wall
SUPPLIED Ø
19mm
3/4″
RECOVERS TO
~6.3mm
min diameter
LENGTH
1.2m
clear
Features
✓3:1 shrink ratio recovers to roughly one third of its supplied diameter, so one size covers a wide range of cables and joints
✓Dual-wall construction with a hot-melt adhesive inner liner that flows when heated to fill voids and seal out moisture and dirt
✓Bonded, moisture-resistant seal suited to outdoor and touring cable work
✓Adhesive lining grips the cable jacket for strain relief and stops the sleeve creeping under repeated flexing
✓Tough polyolefin outer wall adds electrical insulation and abrasion resistance over the joint
✓Recovers evenly with a standard hot air gun, shrinking snugly around irregular shapes and stepped joints
✓Clear finish lets you inspect the joint and read cable markings through the sleeve
✓Ideal for connector backshells, cable joints and field repairs, backed by a 1 year Elumen8 warranty
Specifications
| Type | Adhesive-lined (dual-wall) heatshrink tubing |
| Shrink ratio | 3:1 |
| Supplied diameter | 19mm (3/4″) |
| Recovered diameter | Approx 6.3mm (fully recovered) |
| Inner wall | Hot-melt adhesive liner |
| Outer wall | Polyolefin |
| Colour | Clear |
| Supplied length | 1.2m |
| Brand | Elumen8 |
| Warranty | 1 year |
