Rated 4.9 (112 reviews)
A 10 metre power link cable built on Titanex tough rubber, terminated with a Midnight Black PCE 16A T-Connect at one end and a Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket at the other. The T-Connect gives you both a power inlet and a pass-through in a single body, so fixtures can be daisy-chained off one 16A feed without a separate splitter. 10m is the everyday working length – enough to get from a floor distro up to a low trim truss or across a stage without coiling excess.
10m
LENGTH · general purpose run
16A
RATING · PCE T-Connect
2.5mm²
CABLE · Titanex H07RN-F
IP44
IP RATING · T-Connect
Inlet and pass-through in oneThe PCE T-Connect body carries both a power inlet and a power pass-through. That means you can feed this cable and link onward from the same connector, cutting the number of splitters and adaptors needed on a distro run.
Features
10m length – the general purpose run for stage and truss
Made in Britain
IP44 rated PCE 16A T-Connect in Midnight Black
Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket
Titanex H07RN-F 2.5mm² 3 core rubber sheathed cable
T-Connect gives power inlet and pass-through in one body
Clear heatshrink section ready for asset or ID labelling
Pairs with 5m, 15m, 20m and 25m versions for tidy stock sets
Specifications
| Length | 10m |
| Connector A | PCE 16A T-Connect, Midnight Black, IP44 |
| Connector B | Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket |
| Cable | Titanex H07RN-F 2.5mm² 3 core |
| Stock code | CABL669 |
| Barcode / EAN | 0702338073656 |
| Country of origin | United Kingdom |
