A 25 metre power link cable built on Titanex tough rubber, terminated with a Midnight Black PCE 16A T-Connect at one end and a Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket at the other. The T-Connect gives you both a power inlet and a pass-through in a single body, so fixtures can be daisy-chained off one 16A feed without a separate splitter. At 25m this is the long-haul cable in the range – for reaching FOH positions, back-of-room towers and outlying outdoor fixtures from a single distro.
LENGTH
25m
longest in range
RATING
16A
PCE T-Connect
CABLE
2.5mm²
Titanex H07RN-F
IP RATING
IP44
T-Connect
Inlet and pass-through in one
The PCE T-Connect body carries both a power inlet and a power pass-through. That means you can feed this cable and link onward from the same connector, cutting the number of splitters and adaptors needed on a distro run.
Features
✓
25m length for long throws to FOH and outlying positions
25m length for long throws to FOH and outlying positions
✓
Made in Britain
Made in Britain
✓
IP44 rated PCE 16A T-Connect in Midnight Black
IP44 rated PCE 16A T-Connect in Midnight Black
✓
Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket
Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket
✓
2.5mm² conductors keep volt drop down over the full 25m
2.5mm² conductors keep volt drop down over the full 25m
✓
T-Connect gives power inlet and pass-through in one body
T-Connect gives power inlet and pass-through in one body
✓
Clear heatshrink section ready for asset or ID labelling
Clear heatshrink section ready for asset or ID labelling
✓
Titanex rubber sheath stands up to repeated coiling and traffic
Titanex rubber sheath stands up to repeated coiling and traffic
Specifications
| Length | 25m |
| Connector A | PCE 16A T-Connect, Midnight Black, IP44 |
| Connector B | Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket |
| Cable | Titanex H07RN-F 2.5mm² 3 core |
| Stock code | CABL672 |
| Barcode / EAN | 0702338073687 |
| Country of origin | United Kingdom |
