Rated 4.9 (126 reviews)
In this bundle
- 1 × sE Electronics V8 Dynamic Vocal Microphone Graphite Grey
- 1 × K&M 27910 Microphone Boom Stand with Folding Tripod Base (900-1600mm)
- 1 × W Audio 5m XLR Male – XLR Female Microphone Cable
sE Electronics V8 Dynamic Vocal Microphone Graphite Grey
The sE Electronics V8 is the successor to the V7: a supercardioid dynamic handheld vocal microphone built around the new DMCV8 capsule, with a wider 25 Hz to 21 kHz response, a patented integrated shock mount and a gold-plated XLR. This is the brushed graphite grey finish.
Key Features
Newly developed DMCV8 dynamic capsule, the successor to the V7's DMC7
Extended 25 Hz to 21 kHz response with a more open, natural top end
Tight supercardioid pattern for isolation and gain before feedback
Patented integrated shock mount for very low handling noise
All-metal housing with bevelled spring-steel grille that will not roll
Switchable internal windscreen, spare black windscreen included
Gold-plated 3-pin XLR connector
Includes mic clip, thread adapter and soft case
Specifications
| Type | Dynamic |
| Polar pattern | Supercardioid |
| Frequency response | 25 Hz to 21 kHz |
| Sensitivity | 2.2 mV/Pa (-53 dBV) |
| Output impedance | 300 ohms |
| Connector | Gold-plated 3-pin XLR |
| Magnet | Neodymium |
| Voice coil | Aluminium |
| Diameter | 54 mm |
| Length | 189 mm |
| Weight | 340 g |
| Finish | Graphite grey |
In the box
| Contents | V8 microphone |
| Mic clip | |
| Thread adapter | |
| Spare black internal windscreen | |
| Soft case |
K&M 27910 Microphone Boom Stand with Folding Tripod Base (900-1600mm)
The K&M 27910 is a lightweight, no-nonsense boom stand for vocals, speech and instrument miking. A folding tripod base with metal legs packs down small for transport, and the two-piece column adjusts from 900mm to 1600mm.
The 800mm one-piece boom arm locks with a wing nut, so you can angle the mic over a guitar amp, a drum kit or a lectern without the stand tipping. It ends in a standard 3/8″ thread, so it takes any mic clip directly, or 5/8″ clips with an adaptor.
Features
- Folding tripod base: plastic hub with metal legs
- Two-piece folding column, height 900mm to 1600mm
- 800mm one-piece boom arm with wing-nut clamp
- 3/8″ threaded connector
- Weight 2.35kg
Specifications
- Manufacturer code: 27910-300-55
- Height: 900mm to 1600mm
- Boom arm length: 800mm
- Thread: 3/8″
- Colour: black
- Weight: 2.35kg
W Audio 5m XLR Male – XLR Female Microphone Cable
A W Audio 5 m balanced microphone cable terminated in a 3-pin male XLR at one end and a 3-pin female XLR at the other. A standard mic lead for stage use, studios, install work and any patching where you need to extend or connect microphones, DI boxes or other balanced line level sources.
Key Features
3-pin male XLR to 3-pin female XLR
Balanced microphone / line cable
5 m length
Suitable for stage, studio and install
Specifications
| Connector A | 3-pin male XLR |
| Connector B | 3-pin female XLR |
| Length | 5 m (approximately 16.4 ft) |
| Type | Balanced microphone cable |
| SKU | CABL55 |
