A 25m power lead made in Britain from Titanex 2.5mm² 3 core H07RN-F, terminated PCE 16A male plug to Neutrik powerCON TRUE1 TOP. At this length you are feeding a TRUE1 fixture from a distro on the far side of the stage, an outfield delay tower, or a follow spot position – one continuous drop rather than a lead plus extension, which keeps the number of connections you have to test and prove down.
25m
LENGTH · Long fixture drop
16A
SOURCE END · PCE male plug
TRUE1 TOP
FIXTURE END · Neutrik powerCON
2.5mm²
CONDUCTOR · Titanex H07RN-F
TRUE1 TOP compatibilityTRUE1 TOP is the IP65 version of Neutrik’s powerCON TRUE1 connector. Neutrik has now phased it out and lists the standard TRUE1 cable connector (NAC3F-TRUE1-S) as its direct replacement, so it suits fixtures with powerCON TRUE1 inlets. It does not mate with the original blue/grey powerCON (NAC3) system, so check your fixtures have TRUE1 inlets.
Features
25m drop for cross-stage, delay tower and spot positions
One continuous run instead of a lead plus extension
Manufactured in Britain
Titanex H07RN-F 2.5mm² tough rubber sheathed cable
PCE 16A male plug to Neutrik powerCON TRUE1 TOP
Locking TRUE1 termination will not shake loose in the air
Clear heatshrink for identification or asset label
Titanex sheath stands up to repeated drum winding
240V single phase, standard UK 16A convention
Part of a matched range of lengths for consistent stock
Specifications
| Length | 25m |
| Cable | Titanex H07RN-F 2.5mm² 3 core, tough rubber sheathed |
| Connectors | PCE 16A male plug to Neutrik powerCON TRUE1 TOP |
| Rating | 16A, 240V single phase |
| Identification | Clear heatshrink for labelling |
| Stock code | CABL680 |
| Barcode / EAN | 0702338073588 |
| Country of origin | United Kingdom |





