Rated 4.9 (95 reviews)
Elumen8 adhesive-lined heatshrink tubing in a 6.4mm (1/4″) supplied diameter with a high 3:1 shrink ratio, supplied on a 100m reel. This fine-bore, dual-wall sleeving seals and insulates small solder joints, wire terminations and thin cable tails, while the 100m reel keeps a workshop or flight case stocked for regular cable work. A bench staple for cable techs and audio/lighting engineers.
3:1
SHRINK RATIO · Dual-wall
6.4mm
SUPPLIED Ø · 1/4″
~2.1mm
RECOVERS TO · min diameter
100m
REEL LENGTH · black
Features
3:1 shrink ratio recovers to roughly one third of its supplied diameter for a snug fit on fine wires and terminations
Dual-wall construction with a hot-melt adhesive inner liner that flows when heated to fill voids and seal out moisture and dirt
Bonded, moisture-resistant seal suited to outdoor and touring cable work
Adhesive lining grips the wire jacket for strain relief and stops the sleeve creeping under repeated flexing
Tough polyolefin outer wall adds electrical insulation and abrasion resistance over the joint
Supplied on a continuous 100m reel for cutting to length on the bench
Discreet matt black finish blends into looms, connector tails and dark rigs
Recovers evenly with a standard hot air gun, backed by a 1 year Elumen8 warranty
Specifications
| Type | Adhesive-lined (dual-wall) heatshrink tubing |
| Shrink ratio | 3:1 |
| Supplied diameter | 6.4mm (1/4″) |
| Recovered diameter | Approx 2.1mm (fully recovered) |
| Inner wall | Hot-melt adhesive liner |
| Outer wall | Polyolefin |
| Colour | Black |
| Supplied length | 100m reel |
| Brand | Elumen8 |
| Warranty | 1 year |
