Rated 4.9 (112 reviews)
A 15 metre power link cable built on Titanex tough rubber, terminated with a Midnight Black PCE 16A T-Connect at one end and a Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket at the other. The T-Connect gives you both a power inlet and a pass-through in a single body, so fixtures can be daisy-chained off one 16A feed without a separate splitter. 15m is the useful middle length – long enough to reach a flown truss from a floor distro, short enough to stay manageable in the cable trunk.
15m
LENGTH · floor to flown truss
16A
RATING · PCE T-Connect
2.5mm²
CABLE · Titanex H07RN-F
IP44
IP RATING · T-Connect
Inlet and pass-through in oneThe PCE T-Connect body carries both a power inlet and a power pass-through. That means you can feed this cable and link onward from the same connector, cutting the number of splitters and adaptors needed on a distro run.
Features
15m length reaches a flown truss from a floor distro
Made in Britain
IP44 rated PCE 16A T-Connect in Midnight Black
Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket
Titanex H07RN-F 2.5mm² 3 core rubber sheathed cable
T-Connect gives power inlet and pass-through in one body
Clear heatshrink section ready for asset or ID labelling
Coils compactly enough to stay practical in the cable trunk
Specifications
| Length | 15m |
| Connector A | PCE 16A T-Connect, Midnight Black, IP44 |
| Connector B | Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP socket |
| Cable | Titanex H07RN-F 2.5mm² 3 core |
| Stock code | CABL670 |
| Barcode / EAN | 0702338073663 |
| Country of origin | United Kingdom |
