Lab Gruppen CMA1201 Commercial Mixer Amplifier 120W 100V Half-Rack

Product code: 180355

£409.00 inc VAT
£340.83 ex VAT

SKU: 000-D9304-00010

Out of stock

Out of Stock

Email me when it’s back in stock

Out of Stock
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included
Optional Add-Ons

About this Product

The Lab Gruppen CMA1201 is a 120 W single-channel commercial mixer amplifier that switches between Lo-Z (4/8 Ω) and Hi-Z (70/100 V) operation, so one half-rack unit covers both conventional loudspeaker pairs and distributed constant-voltage lines. Four mic/line inputs with individual level controls, configurable priority ducking and GPI remote volume make it a straightforward head end for background music and paging in bars, restaurants, retail and hotel spaces. Convection cooling means no fan noise, and joining brackets allow rack, table or wall mounting.

120 W
Output power
4
Mic/line inputs
70/100 V
Plus 4/8 Ω Lo-Z
Fanless
Convection cooled
100 V line operationIn 70 V or 100 V mode the CMA1201 drives distributed loudspeaker lines: multiple tapped ceiling or wall speakers wired in parallel on a single run, the standard approach for background music and paging across larger or multi-room spaces. Minimum load impedance is 41 Ω in 70 V mode and 82 Ω in 100 V mode, so keep the total tap wattage on the line within the amplifier’s 120 W rating.

Features

Low-Z (4/8 Ω) and High-Z (70/100 V) operation with switchable 80 Hz high-pass filter
4 mic/line inputs with individual volume controls
Configurable priority muting for paging over background music
Direct drive, constant power technology for reliable audio performance
GPI remote volume control over a standard RJ45 connector and Ethernet cable
Auto Ramp circuitry for quiet, fast power up and down
Front panel master volume with bass and treble tone controls
Aux output for expansion to additional amplifiers
48 V phantom power for the priority mic input
Euroblock mic/line input and output connectors
Energy efficient Class D design with front panel power control
1U half-rack chassis with joining brackets for rack, table and wall mounting

Specifications

Lab Gruppen CMA1201 Commercial Mixer Amplifier 120W 100V Half-Rack specifications
Output power 120 W (4 or 8 Ω)
Amplifier channels 1
Minimum load impedance 4 Ω (4 Ω mode), 8 Ω (8 Ω mode), 41 Ω (70 V mode), 82 Ω (100 V mode)
Inputs 1 × 5-pin Euroblock mic/line with priority/ducking (channel A); 3 × 3-pin Euroblock plus summed stereo RCA (channels B, C, D)
Input impedance 20 kΩ balanced mic/line; 10 kΩ unbalanced line and RCA
Maximum input level 4.88 V (+16 dBu)
Phantom power 48 V
Amplifier output 2-pin Euroblock connector
Aux output 3-pin Euroblock, max level 4.88 V (16 dBu)
Tone controls Bass ±10 dB @ 100 Hz; treble ±10 dB @ 10 kHz
High-pass filter 80 Hz, switchable
Output circuit type Class D
Distortion (1/8 rated power) <0.05%
Frequency response 20 Hz to 20 kHz, +0.5/-1 dB
Signal-to-noise >97 dBA
Remote connector 1 × RJ45 (GPI remote volume)
Cooling Convection cooled, fanless
Mains 100-240 V, 50/60 Hz, IEC connector; fuse T 3.15 A L 250 V
Power consumption (1/8 rated power, 4 Ω) 50 W
Dimensions (H × W × D) 44 × 218 × 299 mm
Weight 2.4 kg
Finish Brushed black anodised aluminium chassis
Warranty 1 year

Full features

  • 120 Watt mixer amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
  • 4 mic/line inputs with individual volume controls
  • Energy efficient design conserves energy and reduces operational cost
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • Direct drive, constant power technology for superior audio performance and reliability
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Front panel power control button for direct access
  • Aux output for expansion to additional amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Convection-cooled, fan-less amplifier technology for low noise

Full specifications

Maximum Output Power

  • 4 or 8 Ω per channel: 120 W

Number of Amplifier Channels

  • Number: 1

Minimum Load Impedance

  • 4 Ω mode: 4 Ω
  • 8 Ω mode: 8 Ω
  • 70 V output mode: 41 Ω
  • 100 V output mode: 82 Ω

Audio Outputs

  • Amplifier output: 2-pin Euroblock connector, stereo
  • Aux output: 3-pin Euroblock connector
  • Aux output max level: 4.88 V (16 dBu)

Audio Inputs

  • Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
  • Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
  • Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
  • Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
    • Mic: 0.038 V (-26 dBu)
    • Balanced: 1.23 V (+4 dBu)
    • RCA: 0.62 V (-2 dBu) each for mono sum RCA
  • Maximum input level: 4.88 V (+16 dBu)
  • Microphone phantom power: 48 V

Controls

  • Front: Power standby button, input and output gain control, tone controls - bass and treble
  • Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)

Tone Controls

  • Bass: ±10 dB @ 100 Hz
  • Treble: ±10 dB @ 10 kHz

Indicators

  • Power: On (blue), force standby (red), standby (yellow
  • Inputs
    • Signal (green LED): >12.3 mV (-36 dBu)
    • Fault (red LED): Clip
  • Master
    • Signal (green LED): >-50 dBu
    • Fault (red LED): Overheat, DC fault, over current, etc
    • Limit (red LED): Output limit

System

  • Output circuit type: Class D
  • Remote connector: 1 x RJ45 Ethernet connector

Performance

  • Distortion, 1/8 rated power: <0.05%
  • Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
  • Crosstalk (2 channel models): >70 dB
  • Signal-to-noise: >97 dBA
  • High-pass filter: 80 Hz HPF

Circuit Protection

  • Cooling: Convection-cooled, fanless
  • Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
  • Load protection: Controlled start and shutdown behaviour, DC-fault protection

Power Supply, Voltage (Fuse)

  • Main voltage: 100-240 V~, 50/60 Hz
  • Fuse: T 3.15 A L 250 V
  • Power consumption 1/8th rated power@ 4 Ω: 50 W
  • Mains connector: Standard IEC connector

Physical and Dimensions

  • Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
  • Weight: 2.4 kg (5.3 lbs)
  • Finish: Brushed black anodised aluminium chassis with black painted steel bottom
  • Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.