The Lab Gruppen LUCIA 240/1-70 is a single-channel install amplifier delivering 240 W into 70 V constant-voltage speaker lines, 120 W at 100 V, or 240 W into a 16 Ω load. Constant-voltage (70/100 V line) distribution lets one amplifier drive long chains of tapped ceiling and wall speakers, the standard approach for background music and paging across larger retail, hospitality and corporate zones. The half-rack 1U chassis ships with a wall-mount bracket, so power, DSP and I/O can live exactly where the zone needs them rather than in a central amp room.
240 W
Into 70 V line
1U
Half-rack chassis
<1 W
Standby draw
1.9 kg
Weight
Features
Compact mono amplifier offering 240 W for high-impedance speakers on 70 V lines
Onboard DSP with per-channel high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
Optimised presets for a wide range of loudspeaker models
Setup wizard and advanced preset editor for Windows and Mac via USB
Automatic Dynamic Loudness Contouring (ADLC) adapts response at any output level
Auto Load Sense sets the Voltage Peak Limiter for the connected load
Enhanced Bass Profile extends LF response with small loudspeakers
Efficient Class-D output stage with low distortion and minimal heat
Energy Star certified with under 1 W standby consumption
Configurable GPIO for wall panels, level control and paging integration; RS232 monitoring
Short-circuit, thermal and under-voltage protection for fail-safe operation
Wall-mount bracket supplied; rackmount, pole-mount and wall panel kits available
Balanced Euroblock inputs and outputs with parallel unbalanced RCA inputs
Temperature-controlled fan stays silent at idle and low output levels
Designed and engineered in Sweden
Specifications
| Amplifier channels | 1 |
| Output, 70 V line | 240 W |
| Output, 100 V line | 120 W |
| Output, 16 Ω | 240 W |
| Max output voltage / current | 100 V peak / 7 Arms |
| Signal-to-noise ratio | >100 dBA |
| Input sensitivity | 4 dBu balanced; -2 dBu RCA |
| Inputs | 3-pin detachable screw terminals (electronically balanced); parallel unbalanced RCA |
| Output connector | 2-pin detachable screw terminal |
| Control | 2 × GPI, GPO contact closure, RS232, USB for configuration and firmware |
| High-pass filter (rear switch) | Off / 50 Hz / 80 Hz |
| Processing | 4 EQ sections per input and output, 2-in/1-out mix matrix, look-ahead limiter, ADLC |
| Latency | User adjustable, 9.15 to 137 ms |
| Mains supply | 100-240 V AC nominal (85-265 V operating), IEC inlet; <1 W standby |
| Dimensions (W × H × D) | 216 × 44 × 280 mm (half-rack, 1U) |
| Weight | 1.9 kg |
| Approvals | CE, CSA, CCC, PSE, FCC, Energy Star |





