Rated 4.9 (120 reviews)
The Dynacord L1300FD is a two-channel Class AB power amplifier for live sound, rated at 2x 600W into 4 ohms and stable down to 2 ohms. Each channel has built-in speaker processing with Dynacord FIR-Drive, so it can drive and tune a PA system without a separate loudspeaker processor. Typical uses are club and venue PA, touring sub and top amplification, and rental stock.
2x 600W
Into 4 ohms
2x 1000W
Into 2 ohms
FIR-Drive
Onboard DSP
2U
Rack height
Features
Two channels, 2x 600W into 4 ohms, 2x 1000W into 2 ohms
Bridged output of 2000W into 4 ohms
True 2 ohm stable output stage
Onboard DSP per channel: multi-band PEQ, crossover, limiters and delay
Channel grouping with group PEQ, GEQ and delay
FIR-Drive linear-phase processing
Protection against over-temperature, DC, HF, back-EMF and peak current, plus inrush limiting and turn-on delay
Front-to-rear cooling with three-stage fans
Controlled and configured with Dynacord system software
Specifications
| Output power, both channels driven | 2 ohm: 1000W, 2.6 ohm: 850W, 4 ohm: 600W, 8 ohm: 320W |
| Output power, single channel | 2 ohm: 1100W, 4 ohm: 660W, 8 ohm: 350W |
| Bridged output | 4 ohm: 2000W, 8 ohm: 1200W |
| Output stage | Class AB |
| Frequency response | 10 Hz to 21 kHz (±1 dB) |
| Signal-to-noise ratio | >104 dB (A-weighted) |
| Voltage gain | 32 dB |
| Maximum input level | +21 dBu |
| Input impedance | 20 kohm, active balanced |
| Crosstalk | < -80 dB (1 kHz, 100W into 4 ohms) |
| Power consumption | 550W at 1/8 maximum output into 4 ohms |
| Cooling | Front to rear, three-stage fans |
| Dimensions (H x W x D) | 88 x 483 x 462.4 mm, 2U rack |
| Weight | 12.9 kg |
